Adjustable Clevis Hanger M Series
General Information
Size Range: 1/2” through 10”
Material: Carbon Steel acc. to the MSS SP 58-TABLE A2/A2M
Service: Designed as an economical product for suspension of insulated or non-insulated stationary pipes.
Installation: Vertical adjustments are possible once the pipe is in place. The lower nut is used to adjust the pipeline to the required elevation. The top nut is used to prevent loosening due to the vibration. The top nut should be tightened after adjustmentThe top nut must securely be tightened to assure proper performance of hanger after adjustment.
Ordering: Specify pipe size, figure number, name and finish.
Finish:
- Electro-Galvanization acc. to ASTM B 633/ASTM F 1941
- Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123
Approvals: Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 – Type 1
Certificaton: UL listed
Technical Specifications
| Code No | Code No for HDG | Size | Max. Selected | Size of Steel | A | B | C | D | E | F | Max Recom. Load kN | Weight per 100 pc(kg) | Certification | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | DN | OD | OD mm | Upper | Lower | mm | mm | mm | mm | |||||||
| IEKCHLM015 | IEKCHLM015H | 1/2” | (15) | 21,3 | 24,0 | 2×20 | 2×20 | M10 | M6 | 66,0 | 51,5 | 30,0 | 13,0 | 0,7 | 8,2 | UL |
| IEKCHLM020 | IEKCHLM020H | 3/4” | (20) | 26,9 | 29,0 | 2×20 | 2×20 | M10 | M6 | 71,0 | 54,0 | 33,0 | 13,0 | 0,7 | 8,7 | UL |
| IEKCHLM025 | IEKCHLM025H | 1” | (25) | 33,7 | 35,0 | 2×20 | 2×20 | M10 | M6 | 78,0 | 58,0 | 37,0 | 14,0 | 1,1 | 9,5 | UL |
| IEKCHLM026 | IEKCHLM026H | 41,0 | 2×20 | 2×20 | M10 | M6 | 84,0 | 61,0 | 40,0 | 14,0 | 1,1 | 10,3 | UL | |||
| IEKCHLM032 | IEKCHLM032H | 1 1/4” | (32) | 42,4 | 45,0 | 2×20 | 2×20 | M10 | M6 | 88,0 | 63,0 | 42,0 | 14,0 | 1,1 | 10,9 | UL |
| IEKCHLM040 | IEKCHLM040H | 1 1/2” | (40) | 48,3 | 51,0 | 2×20 | 2×20 | M10 | M8 | 102,0 | 74,0 | 53,0 | 20,0 | 1,1 | 14,3 | UL |
| IEKCHLM041 | IEKCHLM041H | 55,0 | 2×20 | 2×20 | M10 | M8 | 106,0 | 76,0 | 55,0 | 20,0 | 1,1 | 14,8 | UL | |||
| IEKCHLM050 | IEKCHLM050H | 2” | (50) | 60,3 | 63,0 | 2×20 | 2×20 | M10 | M8 | 121,0 | 87,0 | 66,0 | 27,0 | 1,1 | 16,5 | UL |
| IEKCHLM051 | IEKCHLM051H | 69,0 | 2×20 | 2×20 | M10 | M8 | 127,0 | 90,0 | 69,0 | 27,0 | 1,1 | 17,2 | UL | |||
| IEKCHLM065 | IEKCHLM065H | 2 1/2” | (65) | 73,0 | 75,0 | 3×25 | 3×25 | M12 | M10 | 142,0 | 101,0 | 73,0 | 29,0 | 1,6 | 34,9 | UL |
| IEKCHLM066 | IEKCHLM066H | 80,0 | 3×25 | 3×25 | M12 | M10 | 151,0 | 107,0 | 80,0 | 31,0 | 1,6 | 36,5 | UL | |||
| IEKCHLM070 | IEKCHLM070H | 86,0 | 3×25 | 3×25 | M12 | M10 | 157,0 | 110,0 | 83,0 | 31,0 | 1,6 | 38,2 | UL | |||
| IEKCHLM080 | IEKCHLM080H | 3” | (80) | 88,9 | 91,0 | 3×25 | 3×25 | M12 | M10 | 170,0 | 121,0 | 94,0 | 39,0 | 1,6 | 39,9 | UL |
| IEKCHLM081 | IEKCHLM081H | 96,0 | 3×25 | 3×25 | M12 | M10 | 175,0 | 123,0 | 96,0 | 39,0 | 1,6 | 41,3 | UL | |||
| IEKCHLM085 | IEKCHLM085H | 101,0 | 3×25 | 3×25 | M12 | M10 | 181,0 | 127,0 | 100,0 | 40,0 | 1,6 | 42,3 | UL | |||
| IEKCHLM090 | IEKCHLM090H | 3 1/2” | (90) | 101,6 | 104,0 | 3×25 | 3×25 | M12 | M10 | 185,0 | 129,0 | 102,0 | 41,0 | 1,8 | 43,0 | UL |
| IEKCHLM091 | IEKCHLM091H | 111,0 | 3×25 | 3×25 | M12 | M10 | 192,0 | 133,0 | 106,0 | 41,0 | 1,8 | 45,2 | UL | |||
| IEKCHLM100 | IEKCHLM100H | 4” | (100) | 114,3 | 117,0 | 5×25 | 3×25 | M12 | M10 | 205,0 | 143,0 | 114,0 | 43,0 | 2,2 | 57,3 | UL |
| IEKCHLM101 | IEKCHLM101H | 122,0 | 5×25 | 3×25 | M12 | M10 | 210,0 | 145,0 | 116,0 | 43,0 | 2,2 | 58,3 | UL | |||
| IEKCHLM108 | IEKCHLM108H | 127,0 | 5×30 | 3×30 | M16 | M12 | 220,0 | 153,0 | 115,0 | 39,0 | 2,2 | 76,2 | UL | |||
