Draw-in Anchor
General Information
Service
- Can be used with standart hex bolt or stud
- The extending tongues prevent co-rotation during installation.
Ordering
- Bolt length, I = L + t
- Stud length, I = L + t + thickness of washer & nut
Finish
- Electro-Galvanization acc. to
- ASTM B 633/ASTM F 1941 – EN ISO 2081/EN ISO 4042
Technical Specifications
| Size | M6 | M8 | M10 | M12 | M16 |
|---|---|---|---|---|---|
| Max. permissible load for single anchor (kN) bolt material 5.6 | 0.8 | 3.5 | 5.0 | 7.4 | 8.4 |
| Permissible bending moment at proper edge and axial spacing (Nm) bolt material 5.6 | 5.1 | 12.5 | 24.9 | 43.7 | 85.0 |
| Code No | M | L (mm) |
ØD (mm) |
H (mm) |
t(Max) (mm) |
Distance Between Anchor c (mm) |
Distance from Edge d (mm) |
Fastenable Thickness e (mm) |
Quantity / Pack | Weight / Pack |
|---|---|---|---|---|---|---|---|---|---|---|
| IDCE06 | M6 | 45.0 | 10 | 50.0 | 7 | 260 | 130 | 160 | 1000 | 11.21 |
| IDCES08 | M8 (S) | 57.0 | 12 | 60.0 | 9 | 300 | 150 | 200 | 500 | 7.75 |
| IDCES10 | M10 (S) | 63.0 | 15 | 70.0 | 11 | 360 | 180 | 200 | 250 | 7.75 |
| IDCES12 | M12 (S) | 75.0 | 18 | 85.0 | 13.5 | 460 | 250 | 240 | 200 | 10.65 |
| IDCE16 | M16 | 90.0 | 24 | 110.0 | 17.5 | 520 | 250 | 320 | 100 | 10.40 |
