General Information
Material: Carbon Steel acc. to the MSS SP 58-Table A2/A2M
Welding: Welding acc. to ASME Section IV : ASME Boiler and Pressure Vessel Code and AWS D1.1
Service: Designed to suspend hanger rod for support of light loads under 3,3 KN from a wall or structure.
Installation: Size and thickness of the back plate is governed by the load to be carried and the nature and conditions of the wall. Back plates furnished upon request.
Ordering: Specify bracket, figure number, name and finish.
Finish:
- Electro-Galvanization acc. to ASTM B 633/ASTM F 1941
- Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123
Approvals:Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 – Type 31
Note: Special sizes can be designed to meet Project requirements.
Technical Specifications
| Code No | Code No For HDG | A | B | C | Max. Recom. Load KN |
|---|---|---|---|---|---|
| mm | mm | mm | |||
| IELWSB230 | IELWSB230H | 20.5 | 230.0 | 165 | 3.4 |
| IELWSB330 | IELWSB330H | 20.5 | 330.0 | 266 | 3.4 |
| IELWSB485 | IELWSB485H | 20.5 | 485.0 | 419 | 3.4 |
