Riser Clamp
General Information
Size Range: 1/2” through 30”
Material: Carbon Steel acc.to the MSS SP 58-TABLE A2/A2M
Service: Designed to support or hold the vertical pipe runs.The load is transmitted to the structure by the ears on each side.
Installation: Clamp is fitted and bolted preferably below a coupling or welded lugs on steel pipe. Clamp is designed for standard steel pipe O.D. and this must be considered in sizing the riser for other types of piping.
Ordering: Specify pipe size, figure number, name and finish.
Finish:
- Electro-Galvanization acc. to ASTM B 633/ASTM F 1941
- Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123
Approvals: Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 – Type 8
Cerlificaton: UL listed.
Technical Specifications
| Code No | Code No for HDG | Size | S x B | A | L | Max Recom. Load kN | Weight per Box (kg) | Certification | |
|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | mm | mm | ||||||
| IEKRC015 | IEKRC015H | 1/2” | (15) | 5X30 | M10 | 222,0 | 1,0 | 61,0 | UL |
| IEKRC020 | IEKRC020H | 3/4” | (20) | 5X30 | M10 | 226,0 | 1,0 | 62,0 | UL |
| IEKRC025 | IEKRC025H | 1” | (25) | 5X30 | M10 | 234,0 | 1,0 | 65,0 | UL |
| IEKRC032 | IEKRC032H | 1 1/4” | (32) | 6X30 | M12 | 242,0 | 1,0 | 85,0 | UL |
| IEKRC040 | IEKRC040H | 1 1/2” | (40) | 6X30 | M12 | 248,0 | 1,0 | 88,0 | UL |
| IEKRC050 | IEKRC050H | 2” | (50) | 6X30 | M12 | 260,0 | 1,0 | 93,0 | UL |
| IEKRC065 | IEKRC065H | 2 1/2” | (65) | 6X30 | M12 | 276,0 | 1,7 | 101,0 | UL |
| IEKRC080 | IEKRC080H | 3” | (80) | 6X30 | M12 | 288,0 | 2,3 | 107,0 | UL |
| IEKRC090 | IEKRC090H | 3 1/2” | (90) | 6X40 | M12 | 332,0 | 3,0 | 156,0 | UL |
| IEKRC100 | IEKRC100H | 4” | (100) | 6X40 | M12 | 344,0 | 3,5 | 164,0 | UL |
| IEKRC125 | IEKRC125H | 5” | (125) | 6X50 | M12 | 369,0 | 5,0 | 220,0 | UL |
| IEKRC134 | IEKRC134H | – | (158) | 6X50 | M12 | 386,0 | 6,0 | 230,0 | – |
| IEKRC150 | IEKRC150H | 6” | (150) | 6X50 | M12 | 398,0 | 7,0 | 246,0 | UL |
| IEKRC185 | IEKRC185H | – | (192) | 10X50 | M16 | 454,0 | 9,5 | 250,0 | – |
| IEKRC200 | IEKRC200H | 8” | (200) | 10X50 | M16 | 480,0 | 11,0 | 498,0 | UL |
| IEKRC250 | IEKRC250H | 10” | (250) | 10X50 | M16 | 533,0 | 11,0 | 573,0 | UL |
| IEKRC300 | IEKRC300H | 12” | (300) | 12X60 | M16 | 584,0 | 12,0 | 896,0 | UL |
| IEKRC350 | IEKRC350H | 14” | (350) | 12X60 | M16 | 616,0 | 12,0 | 956,0 | – |
| IEKRC400 | IEKRC400H | 16” | (400) | 16X60 | M20 | 667,0 | 13,0 | 1408,0 | – |
| IEKRC450 | IEKRC450H | 18” | (450) | 16X60 | M20 | 717,0 | 13,0 | 1534,0 | – |
| IEKRC500 | IEKRC500H | 20” | (500) | 16X60 | M20 | 769,0 | 13,0 | 1704,0 | – |
| IEKRC600 | IEKRC600H | 24” | (600) | 16X75 | M20 | 870,0 | 13,0 | 2428,0 | – |
| IEKRC750 | IEKRC750H | 30” | (750) | 16X75 | M20 | 1023,0 | 13,0 | 2949,0 | – |
