Top Beam Clamp
General Information
Size Range: 76mm through 228mm
Material: Carbon Steel acc. to the MSS SP 58-TABLE A2/A2M
Service: Designed for top of beams if hanger rod is required tangent to flange edge. Eliminating drilling holes in structural members.
Ordering: Specify rod size, figure number, name and finish.
Finish:
- Electro-Galvanization acc. to ASTM B 633/ASTM F 1941
- Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123
Approvals: Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 – Type 25
Technical Specifications
| Code No | Code No For HDG | Flange Width – W (mm) | Flange Thickness Max. (mm) | Bolt | Max. Recom. Load KN | |
|---|---|---|---|---|---|---|
| Min. | Max. | Max. | ||||
| IEFSBC001 | IEFSBC001H | 76.0 | 114.0 | 12.7 | M12 | 1.3 |
| IFSBC002 | IFSBC002H | 117.0 | 152.0 | 17.5 | M12 | 1.3 |
| IEFSBC003 | IEFSBC003H | 155.0 | 190.0 | 19.0 | M12 | 1.3 |
| IEFSBC004 | IEFSBC004H | 193.0 | 228.0 | 23.8 | M12 | 1.3 |
