Welded Beam Attachment
General Information
Size Range: 3/8” through 2”
Material: Carbon Steel acc. to the MSS SP 58-TABLE A2/A2M
Service: Clamp centers the load on beam to prevent distortion.
Installation: Designed for attaching hanger rod to the bottom of structral steel where heavy loads and large hanger rod sizes are required. Can be welded in place in either the upright or inverted position.
Ordering: Specify rod size, figure number, name and finish.
Finish:
- Electro-Galvanization acc. to ASTM B 633/ASTM F 1941
- Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123
Approvals: Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 – Type 22
Technical Specifications
| Code No | Code No for HDG | Size | E | D | A | Max Recom. Load(kN) | |
|---|---|---|---|---|---|---|---|
| Inch | mm | mm | |||||
| IEFWBA10 | IEFWBA10H | 3/8” | 10,0 | 32,0 | M12 | M10 | 3,0 |
| IEFWBA15 | IEFWBA15H | 1/2” | 15,0 | 32,0 | M16 | M12 | 6,0 |
| IEFWBA16 | IEFWBA16H | 5/8” | 16,0 | 32,0 | M20 | M16 | 9,5 |
| IEFWBA20 | IEFWBA20H | 3/4” | 20,0 | 41,0 | M22 | M20 | 14,0 |
| IEFWBA22 | IEFWBA22H | 7/8” | 22,0 | 51,0 | M24 | M22 | 19,5 |
| IEFWBA26 | IEFWBA26H | 1” | 26,0 | 51,0 | M30 | M24 | 25,0 |
| IEFWBA30 | IEFWBA30H | 1 1/8” | 30,0 | 70,0 | M33 | M30 | 33,0 |
| IEFWBA32 | IEFWBA32H | 1 1/4” | 32,0 | 77,0 | M36 | M33 | 42,0 |
| IEFWBA39 | IEFWBA39H | 1 1/2” | 39,0 | 90,0 | M42 | M39 | 61,0 |
| IEFWBA44 | IEFWBA44H | 1 3/4” | 44,0 | 95,0 | M48 | M45 | 82,0 |
| IEFWBA50 | IEFWBA50H | 2” | 50,0 | 95,0 | M60 | M52 | 109,0 |
