General Information
Material: Carbon Steel acc.to the MSS SP 58-TABLE A2/A2M
Service: Clamp centers the load on beam to prevent distortion.
Installation: Designed to center the load under the beam flanges.
Ordering: Figure number, width of flange, name and finish.
Finish
- Electro-Galvanization acc. to ASTM B 633/ASTM F 1941
- Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123
Approvals: Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 – Type 21
Technical Specifications
| Code No | Code No for HDG | Bolt Size | A | B | C | Max Recom. Load(kN) |
|---|---|---|---|---|---|---|
| Inch | Inch | Inch | ||||
| IEFBC001 | IEFBC001H | M12 | 1/2 | 1 3/8 | 2 5/32 | 4,0 |
| IEFBC002 | IEFBC002H | M16 | 5/8 | 1 9/16 | 2 3/8 | 5,0 |
| IEFBC003 | IEFBC003H | M20 | 25/32 | 1 25/32 | 2 3/4 | 6,0 |
