General Information

Size Range: 2” through 24”
Material: Carbon Steel acc. to the MSS SP 58-TABLE A2/A2M
Service: Designed for pipe lines where horizontal movement may take place due to expansion and contraction. Vertical adjustments are possible once the pipe is in place.The lower nut is used to adjust the pipeline to the required elevation.
Ordering: Specify pipe roll size, figure number, name and finish.
Finish

  • Electro-Galvanization acc. to ASTM B 633/ASTM F 1941
  • Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123

Approvals: Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 – Type 42

Technical Specifications

Code No Code No
for HDG		 Pipe Size A B C D E F Max Recom.
Load kN		 Weight
100 pcs (lbs)
Inch DN Inch Inch Inch Inch Inch
IEKHDRC050 IEKHDRC050H 2” 50 18 1/32 1 5/16 3/4 2 9/16 22 M12 4,0 1609
IEKHDRC065 IEKHDRC065H 2 ½” 65 20 1 5/16 3/4 2 9/16 24 1/32 M12 4,0 1764
IEKHDRC080 IEKHDRC080H 3” 80 20 1 1/2 3/4 2 15/16 24 1/32 M16 6,7 2756
IEKHDRC100 IEKHDRC100H 4” 100 22 1/16 1 9/16 3/4 3 5/32 25 31/32 M20 9,8 4079
IEKHDRC125 IEKHDRC125H 5” 125 22 1/16 1 31/32 3/4 3 15/16 25 31/32 M20 9,8 5115
IEKHDRC150 IEKHDRC150H 6” 150 24 1/32 1 3/8 1 1/32 3 15/16 28 M22 13,0 5644
IEKHDRC200 IEKHDRC200H 8” 200 27 1 3/8 1 1/32 4 29/32 31 1/32 M22 13,0 7848
IEKHDRC250 IEKHDRC250H 10” 250 30 1 9/16 1 1/2 6 3/32 36 1/32 M30 24,0 14440
IEKHDRC300 IEKHDRC300H 12” 300 32 1 25/32 1 25/32 7 3/32 38 M36 34,5 18365
IEKHDRC350 IEKHDRC350H 14” 350 34 1/32 1 25/32 1 25/32 7 3/32 40 M36 34,5 19401
IEKHDRC400 IEKHDRC400H 16” 400 35 31/32 1 31/32 2 7 7/8 42 M36 40,0 26852
IEKHDRC450 IEKHDRC450H 18” 450 39 1/32 1 31/32 2 9 1/16 45 M36 40,0 33091
IEKHDRC500 IEKHDRC500H 20” 500 42 2 5/8 2 17/32 9 7/16 50 1/2 M48 60,0 55027
IEKHDRC600 IEKHDRC600H 24” 600 45 2 5/8 2 17/32 10 1/4 53 1/2 M48 60,0 63736