General Information
Size Range: 76mm through 228mm
Material: Carbon Steel acc. to the MSS SP 58-TABLE A2/A2M
Service: Designed for top of beams if hanger rod is required tangent to flange edge. Eliminating drilling holes in structural members.
Ordering: Specify rod size, figure number, name and finish.
Finish:
- Electro-Galvanization acc. to ASTM B 633/ASTM F 1941
- Hot Dipped Galvanized. (HDG) acc.to ASTM A 153/123
Approvals: Complies with Manufacturer’s Standardization Society MSS SP-58 & MSS SP-69 – Type 25
Technical Specifications
| Code No | Code No For HDG | Size | Flange Width (mm) | A | B | Max. Recom. Load KN | |
|---|---|---|---|---|---|---|---|
| Min. | Max. | Inch | |||||
| IEFABCM10 | IEFABCM10H | M10 | 3 1/2 | 8 | M10 | 2 19/32 | 1,3 |
| IEFABCM12 | IEFABCM12H | M12 | 3 1/2 | 8 | M12 | 2 19/32 | 3,0 |
| IEFABCM16 | IEFABCM16H | M16 | 3 1/2 | 8 | M16 | 2 19/32 | 4,3 |
