Draw-in Anchor

General Information

Service

Can be used with standart hex bolt or stud

The extending tongues prevent co-rotation during installation.

Ordering

Bolt length, I = L + t

Stud length, I = L + t + thickness of washer & nut

Finish

Electro-Galvanization acc. to

ASTM B 633/ASTM F 1941 - EN ISO 2081/EN ISO 4042

Ürün Ölçüleri

Size M6 M8 M10 M12 M16
Max. permissible load for single anchor (kN) bolt material 5.6 0.8 3.5 5.0 7.4 8.4
Permissible bending moment at proper edge and axial spacing (Nm) bolt material 5.6 5.1 12.5 24.9 43.7 85.0
Code No M L
(mm)
ØD
(mm)
H
(mm)
t(Max)
(mm)
Distance Between Anchor
c (mm)
Distance from Edge
d (mm)
Fastenable Thickness
e (mm)
Quantity / Pack Weight / Pack
IDCE06 M6 45.0 10 50.0 7 260 130 160 1000 11.21
IDCES08 M8 (S) 57.0 12 60.0 9 300 150 200 500 7.75
IDCES10 M10 (S) 63.0 15 70.0 11 360 180 200 250 7.75
IDCES12 M12 (S) 75.0 18 85.0 13.5 460 250 240 200 10.65
IDCE16 M16 90.0 24 110.0 17.5 520 250 320 100 10.40